OREGON DEPT. OF TRANSPORTATION (ODOT): HWY. 6 Devils Lake Fork Bridge Repairs Start in Early February

Posted on by Editor

Gif of flashing VMS sign that reads ROAD WORK USE CAUTION

We’re repairing and preserving the Devils Lake Fork Bridge that crosses the Wilson River on OR 6 near milepost 32.

When work starts, you can expect:

  • Crews working during the day.
  • Single lane closures with an automated flagging device to control traffic through the work zone between:
    • 7 a.m. to 5 p.m. Monday through Thursday
    • 7 a.m. to 12 p.m. on Fridays.
  • Most of the work to be under the bridge.
  • Construction noise and delays.
  • The bridge to be weight-restricted for the duration of the project.

We plan to complete this work in 2026.


 

Front of a semi truck icon

Semitrucks and heavy vehicles

If you drive a semitruck or similar heavy vehicle, you can expect this bridge to be weight restricted during construction to permit weight tables 2 through 5. Please review the Commerce and Compliance Division’s Permittable Vehicle Dimensions and Weight Tables webpage to learn more.

When you see an automated flagger assistant device, remember to:

Automated Flagger Assisted Device gif showing the arm lever moving up and down

  • Stop when the light is red and the flag is down.
  • Wait for the arm to be fully up before you start moving.
  • Drive carefully when the light is flashing orange and the flag is up.

Don’t forget – there is a person nearby controlling the automated flagger assistant devices. You may not see them, but they are there to make sure traffic is moving smoothly.

Learn more about automated flagger assistant devices by watching our YouTube video.

Caution tape banner

Project area map

About the project

The Devils Lake Fork Bridge is on OR 6, an important tourist and freight route between the Portland area and the coast.

As part of the repairs to the bridge, we’re planning to:

  • Remove the rust.
  • Replace worn out or damaged bolts and rivets as needed.
  • Apply a new layer of paint.

This work will help strengthen and preserve the bridge, keeping it in good working condition.
Visit the project webpage to learn more.

Caution tape banner

OR 6 highway icon

Curious what else we’re doing on OR 6?

Check out the corridor webpage to learn more about the work we have planned along OR 6 to improve safety and give you a smoother ride.

Caution tape banner

Icon of interactive construction map

Check out what we’re building in and around your community

See what we’re doing on the roads in and around your community by visiting our construction webpage. Explore our interactive map to see what we’re working on.
work zone iconPay attention in work zones, slow down and move over – imagine this is where you work. Always drive safely, watch for construction signs and workers.

Remember: fines double in all Oregon work zones, whether workers and signs are present or not. ​

Slow-down for workers

TripCheck logoKnow Before You Go

Travelers can find the latest road conditions, traffic cameras and weather information at TripCheck.com.This site provides real-time travel information to help people plan safe trips year-round.